Ultrasonic Flowmeter Path Geometry (Part 1 of 2)
Spitzer and Boyes, LLC 
 
Various ultrasonic energy path geometries are used to implement the various types of ultrasonic flowmeters. click for more...

 

Safety First:
Placing the Priority on the Worker Over the Instrument
Flow Control (June 2009) 
 
In a seminar some years ago, one of my students posed an adamant objection to the manner in which transmitters are taken out of service in steam applications. Fortunately, the student not only knew the procedure as to how to remove the transmitter from service, but also why it was done according to this procedure. click for more...

 

How Rising Density Affects DP Steam Flow Measurement
Flow Control (June 2009) 
 
A QUIZ:  For a fixed differential-pressure measurement (say 100 inches of water column) in a differential-pressure steam flow measurement system, increasing density causes the compensated steam mass flow measurement to:

A. Decrease proportional to the square root of steam density
B. Decrease proportional to the steam density
C. Increase proportional to the square root of steam density
D. Increase proportional to the steam density
click for more... 
 

This email was sent to you from Applied Measurement & Control.
New York State's Leading Provider of instrumentation and Process Controls.

For more information please visit our website at www.appliedmc.com
call us at 1-585-924-3281 or send us an email at sales@appliedmc.com