This issue sponsored by Brian Sharpe, Applied Measurement and Control

Vortex and Fluidic Flowmeters (Part 4 of 4)
Spitzer and Boyes, LLC

Reynolds number is the dimensionless ratio of the inertial forces (that tend to move the fluid downstream) to the viscous forces (that tend to slow the fluid). This ratio gives an indication of the hydraulic nature of the fluid flow. Typically, fluid flows with similar Reynolds numbers exhibit similar hydraulic characteristics... click for more

Flowmeters Get Around
CONTROL

According to the number crunchers at Flow Research, the value of the flowmeters sold worldwide last year runs well into the hundreds of millions of dollars. That’s a lot of flowmeters. Most show up in the usual places-water and wastewater facilities, oil and gas operations, and batch processing facilities. However, not every flowmeter is destined for such prosaic applications. Some end up in underground lakes or inside cement mixers. The really lucky ones get to go to the ski slopes or major amusement parks... click for more

Pressure & Temperature Tap Placement:
Deciding Between Upstream and Downstream Location
Flow Control

In most applications, the pressure and temperature of a gas flow can vary - sometimes significantly. Often, these variations are not considered during design and only become apparent during operation... click for more

YOUR FEEDBACK

We value your comments and suggestions. Please e-mail us at news@appliedmc.com. Unless otherwise noted, receipt of your e-mail constitutes permission to include its contents
(or parts thereof) in the E-zine.

ABOUT SPITZER AND BOYES, LLC

Spitzer and Boyes, LLC sells Consumer Guides for end-users that contain detailed product information and analysis about Coriolis Mass Flowmeters, Differential Pressure Flow Transmitters, Magnetic Flowmeters, Ultrasonic and Correlation Flowmeters, Vortex Shedding and Fluidic Flowmeters, Non-Contact Level Gauges and other Instrumentation. They also offer seminars on these topics at various locations across the United States.

This email was sent to you from
Applied Measurement & Control,
New York State’s Leading Provider of Instrumentation and Process Controls.

For more information please visit our website at www.appliedmc.com
call us at 1-585-924-3281 or send us an email at sales@appliedmc.com