Jan. 2014 |
Density's Children: Introduction |
|
Part III: The Expert Witness
A case involving alleged sewage district overcharges |
|
QUIZ CORNER: How Should DP Flowmeter Impulse Tubing Be Sloped? |
|
|
Feb. 2014 |
Wastewater Applications |
|
The Importance of Control System Integrators (Part 1 of 3) |
|
QUIZ: Approximately how much straight run is required for an
orifice-plate flowmeter installation? |
|
|
March 2014 |
Density's Children (Part 3 of 3): Measuring Tools |
|
The Importance of Control System Integrators (Part 2 of 3) |
|
QUIZ CORNER: What is the purpose of providing straight run upstream and downstream of flowmeter installations? |
|
|
April 2014 |
Why Measuring Flow is a Difficult Task: Introduction |
|
The Importance of Control System Integrators (Part 3 of 3) |
|
Picking the Right Flowmeter |
|
|
May 2014 |
Why Measuring Flow is a Difficult Task: Damping the Signal (Part 1 of 2) |
|
Part I: Considering a Large-Line Orifice Plate Flowmeter |
|
QUIZ CORNER: Measuring the Flow of Mixed Liquids |
|
|
June 2014 |
Why Measuring Flow is a Difficult Task: Damping the Signal (Part 2 of 2) |
|
Part II: Considering a Large-Line Orifice Plate Flowmeter |
|
QUIZ CORNER: Piping Orientation for Solids-Laden Water Flow |
|
|
July 2014 |
Why Measuring Flow is a Difficult Task: Profile Effects |
|
Part III: Considering a Large-Line Orifice-Plate Flowmeter |
|
QUIZ CORNER: Piping Orientation for Water Flow with Non-Condensable Gas
|
|
|
August 2014 |
Why Measuring Flow is a Difficult Task: Physical Properties |
|
Insider Information: Specifying a Coriolis Flowmeter for Gas Service |
|
QUIZ CORNER: Flange Pressure Rating |
|
|
September 2014 |
Why Measuring Flow is a Difficult Task: Flowmeter technologies
|
|
Strike 1! Specifying a Coriolis flowmeter for gas service |
|
QUIZ CORNER: Flowmeter Specsmanship |
|
|
October 2014 |
Why Measuring Flow is a Difficult Task: Calibration Complexity |
|
Strike 2! Specifying a Coriolis mass flowmeter for gas service |
|
QUIZ CORNER: Differential Pressures Produced By an Orifice Plate |
|
|
November 2014 |
Why Measuring Flow is a Difficult Task: Installation |
|
Strike 3! Specifying a Coriolis mass flowmeter for gas service |
|
QUIZ CORNER: Why Measure Flow? |
|
|
December 2014 |
Starting with the Correct Consultant |
|
Success at Last! Specifying a Coriolis mass flowmeter for gas service |
|
Reflections from South Africa: Lessons learned from presenting seminars internationally |
|
|
|
|
|
|